head of water for use in water excluding structures. Eliminates site mixing normally associated with wet sealants. Same section used vertically and horizontally simplifies ordering.Can be fixed in damp conditions as no priming is required.Easily installed Does not require skilled labour or specialist equipment - simply inserted into preformed void.Grip fins provide mechanical anchorage increasing retention properties.Ĭan be used in conjunction with SCP concrete/rubber adhesive for increased performance.Unique design allows for easy installation, but difficult removal.The two-part crack inducer should be between 1⁄4 and 1⁄3 depth of slab.Top section easily removed prior to sealing.Void size 25mm deep by width as indicated above.The two-part crack inducer is designed for use where the top section is removed to expose a sealant void which is sealed with SCP Compression Seal or Sealant. Clearcrack* should be between 1⁄4 and 1⁄3 depth of slab.For controlled crack inducement and joint forming in concrete paved areas.Inserted into wet concrete when finished level achieved reduces risk of random cracking.
Void size 25mm deep, 10mm wide in all sizes.Top portion can be left intact omitting need for joint sealant.Rigid PVC joint former with integral tear-off top that gives an instant joint void.Eliminates use of bottom crack inducers on slabs with a depth of less than 300mm.Clearcrack, manufactured from Heavy Duty P.V.C., is designed for use where the top section of the crack inducer is to be left in-situ in the floor to form a wearing surface.
0 kommentar(er)
